Hand-made templates are duplicates obtained from the denture/tooth arrangement with access holes or titanium tubes. These are located in the correct positions and axes of the planned prosthetic teeth according to the CBCT a...

Incision can be made either on top of the crest or at some distance in the labial fold. The outcome for both approaches seems comparable. A sagittal release incision at the midline eases the reflection of the labial mucoperiosteum. It is logical to try to achieve...

In the edentulous lower jaw implant insertion can be limited due to bone resorption processes and the resulting superficial alveolar nerve topography. In the anterior region less than 5-6 mm in height and 6 mm in width requires bone grafting before implant placement...

The tradition to insert 6 implants, and eventually more, in an arch-wide pattern dates back to the early days of osseointegration when implants with a machined surface were used and risk for early...

Advantages of abutment-supported prostheses are 1) When implants are not parallel to each other, the use of angulated abutments can "correct" for the non-parallelism 2) Angulated abutments are available for a screw-retained prosthesis and 3) Custom abutments can be...

With appropriate pre-drilling based on their shape upon insertion into the bone, tapered implants will achieve a gradually increasing contact pressure with the surrounding bone and thus provide a high primary stability. This primary...

The majority of commercially available implants are variations of Brånemark’s original design of a screw which he coined as 'fixtures'. This has been the starting point for numerous current market variations that incorporate convergent themes of implant material...

Insertion torque represents the resistance of bone during implant placement. Since too low a torque corresponds to low initial mechanical implant stability and too high torque levels lead to avascular periimplant bone...

Accurate implant planning is the first step to achieve an optimum prosthetic result. Well-fitting, well-designed dentures can directly be used for planning and pre-surgical analysis or a new tooth arrangement and mock-up have to be considered...

Any intra-oral surgical intervention begins with the incision and finishes with a suture or gluing. Indications for a crestal incision include one-stage surgeries where the implant or abutment is non-submerged and is piercing into the oral...

Emerging techniques in dental implant surgery are trending towards one-stage procedures and immediate function and therefore require a high level of primary stability of the implant. In order to implement the most appropriate drilling protocol based on bone...

The treatment of the edentulous jaw can be a mixture of placing implants in healed and fresh extraction sockets. Unequal hard and soft tissue levels around the implants (Fig. 1&2), especially in the interforaminal region, can be adjusted by leveling the bone...

The choice of anesthesia depends on many variables including the complexity of treatment, duration of treatment, need for patient awareness and the response during treatment, only to name a few. In general, the clinician and patient should discuss the...

Traditional endosseous oral implant treatment protocols ad modum Brånemark required a variable healing period (usually 3-6 months) before prosthesis placement. The healing period was considered necessary to achieve osseointegration and establish a load-bearing interface...

The aims of peri-implant soft tissue management in the edentulous mandible are the eventual reconstruction of attached gingiva or immobilizing the soft tissue at the implant-soft tissue interface. Vestibuloplasty means deepening of the...